Comments on: How to program remote control codes for Yamaha AV Receivers http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/ If it ain't broke you're not trying hard enough Sun, 24 Apr 2011 15:46:34 +0000 hourly 1 http://wordpress.org/?v=3.2.1 By: scott http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/comment-page-1/#comment-105192 scott Sun, 24 Apr 2011 15:46:34 +0000 http://madabar.com/techblog/?p=31#comment-105192 i have yahama av reciever rx v361. but my remote is a rav 336.where do i find codes i have yahama av reciever rx v361. but my remote is a rav 336.where do i find codes

]]> By: Scott http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/comment-page-1/#comment-102108 Scott Sat, 12 Feb 2011 02:34:07 +0000 http://madabar.com/techblog/?p=31#comment-102108 Thank you so much for this. I kept getting the NG message and you helped me solve it. I want holding the 2 buttons down until the display goes back to the sound setting. That is the part that I wasnt doing Thank you so much for this. I kept getting the NG message and you helped me solve it. I want holding the 2 buttons down until the display goes back to the sound setting. That is the part that I wasnt doing

]]> By: Colin Holloway http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/comment-page-1/#comment-85668 Colin Holloway Wed, 08 Jul 2009 03:33:23 +0000 http://madabar.com/techblog/?p=31#comment-85668 I have Yamaha RX V-3200. I am trying to set up the Yamaha remote to control all in my basic system: rx v3200 panasonic g10 plasma samsung 1600 comcast hdtv Somehow, the volume button for the remote only controls the cable volume which shows bars going across the bottom of the picture but does not change the volume. I read the manual and tried to clear the "learned" function but all it gives is an error. Now the master volume does not do anything but revert to moving the cable volume. Can anyone help here? Also, is there a way to delete sources on remote such as vcr1, vcr2, phono, etc? Thanks I have Yamaha RX V-3200. I am trying to set up the Yamaha remote to control all in my basic system:

rx v3200
panasonic g10 plasma
samsung 1600
comcast hdtv

Somehow, the volume button for the remote only controls the cable volume which shows bars going across the bottom of the picture but does not change the volume.

I read the manual and tried to clear the “learned” function but all it gives is an error. Now the master volume does not do anything but revert to moving the cable volume.

Can anyone help here? Also, is there a way to delete sources on remote such as vcr1, vcr2, phono, etc?

Thanks

]]> By: twegener http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/comment-page-1/#comment-60188 twegener Tue, 24 Feb 2009 09:47:38 +0000 http://madabar.com/techblog/?p=31#comment-60188 It's my understanding that the "RemoteSetup OK" message just means that the remote control will now send commands corresponding to the code that you entered. If the other component doesn't respond after that then it's likely that the code is not the right one for that component. If none of the codes work you're probably out of luck. :-( It’s my understanding that the “RemoteSetup OK” message just means that the remote control will now send commands corresponding to the code that you entered. If the other component doesn’t respond after that then it’s likely that the code is not the right one for that component. If none of the codes work you’re probably out of luck. :-(

]]> By: Paul http://madabar.com/techblog/2009/02/20/how-to-program-remote-control-codes-for-yamaha-av-receivers/comment-page-1/#comment-59155 Paul Sun, 22 Feb 2009 12:22:39 +0000 http://madabar.com/techblog/?p=31#comment-59155 What happens if none of the codes don't work for that component. even though it says 'remote setup ok', and if other components work correctly? What happens if none of the codes don’t work for that component. even though it says ‘remote setup ok’, and if other components work correctly?

]]>